Base de connaissances et FAQ




Question Dernière modification
1
answer
Switching from the classic style to the integrated style
Dernière modification: janv. 19, 2006
Interface, integrated style, classic
2006/01/19
1
answer
Modelling a transmission line with no shield wires
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Assigning a Radius to Conductors Imported from a DXF File
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Change of Scale when Importing a DXF File
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Modelling a Fence in MALT
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Using the "Zoom Polygon" in AutoGrid Pro
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Modelling of Building Foundations
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
How Do You Model Backfill Material Around a Conductor?
Dernière modification: déc. 30, 2009
Backfill, Bentonite, Ground Enhancement Material, Earth Enhancement Material
2009/12/30
1
answer
Transient from De-Energized Line
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
How to Combine Inductive and Conductive Components from AC Interference Study
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Using TRALIN to Compute Symmetric Components
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Computing Magnetic Fields Around Buried Cables
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Effects of Approximations in TRALIN
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Setting the Maximum Number of Busses in SPLITS
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Modelling a Conductor Bundle in HIFREQ
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Accounting for the Phase Difference when Computing Voltage Differences.
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Correcting TRALIN Negative Cable Shunt Impedances
Dernière modification: déc. 06, 2004
Negative Resistive Component, Capacitive Coupling, Interconnection, Shunt
2004/12/06
1
answer
Comparisons between Direct Measurement of Transmission Line Impedances and Computations
Dernière modification: avr. 22, 2008
Transmission Line Impedances, Measurements, Computations, Comparison
2008/04/22
1
answer
Modelling Electromagnetic Fields Above Ground
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Standard Surge Error Messages
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Navigation Problems in Computations/Advanced Screen
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Effects of Fault Clearing Time on Safety Thresholds
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Exporting a Hot-Zone Contour Plot to AutoCAD
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Differences Between MALZ and HIFREQ in Input Impedance at High Frequency
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Purpose of Sampling Exponent
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Computing Eddy Currents in HIFREQ
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Differences Between Modulated and Unmodulated Response in FFTSES
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Resolving Time Delays in HIFREQ-FFTSES
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Defining a Conductor Type in HIFREQ
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Finding the Number of Observation Points on a Profile
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Circulating Currents in HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Unable to Plot in FFTSES
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Implementing Impedance Matching in HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Resistance, Capacitance and Inductance in HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Modelling an ACSR conductor in HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Interpretation of HIFREQ Frequency Results
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
The Meaning of Modulated Frequency Spectrum
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Identifying Curves in FFTSES Plots
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Computing Touch Voltages with FFTSES.
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Using MALZ in Transient Analyses
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Modeling antennas with HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Editing Conductors that are Part of a Group in SESCAD
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Effects of Magnetic Materials in HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Step and End-Point Modes for Profile Specification in SESCAD
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Modelling the Frequency Dependence of Soil Parameters in HIFREQ / MALZ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Modelling a Realistic Square Wave Transient in FFTSES
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
RMS versus Peak Values in CDEGS Software
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Transient Behavior in High Resistivity Soils
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Segment limits in HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Computing Magnetic Fields in MALZ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Reducing the Run Time of MALT and MALZ
Dernière modification: déc. 03, 2004
Computation Speed
2004/12/03
1
answer
Sizing Conductors for Ampacity
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Controlling Printing in GraRep
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Effects of Soil Ionization
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Reducing the number of recommended frequencies in FFTSES
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Modelling coated plates in MALZ / HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Modelling Retardation Effects in HIFREQ/FFTSES
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Physical Meaning of Leakage Currents in HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Frequencies that Must be Run in a Transient Study.
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Modelling a Lightning Channel in HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Large Graphics File Size in FFTSES
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Increasing the Grid Limits in Input Toolbox
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Carrying out a Simple Transient Study using HIFREQ/FFTSES
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Units of Forward Fourier Transform in FFTSES
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Standards for Safety with Transients
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Modelling Insulators in HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Computing the Grid Impedance in HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Specifying the computation frequency in HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Usage of GPR, Scalar Potential, Gradient of Scalar Potential and Vector Potential in HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Exporting MALT Computation Data
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Touch Voltages Around Disconnected Structures in MALZ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Surge Impedance
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Effects of Insulation Layer Resistivity Greater than Sub-Surface Layer Resistivity.
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Restoring the Old Color Patterns in 2D Spot Plots
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Transferring Data Between MALT, MALZ and HIFREQ
Dernière modification: déc. 03, 2004
2004/12/03
1
answer
Calculation of Safety Limits in Output Toolbox
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Extracting Time-Domain Results From FFTSES & Using FileView to Create Spreadsheet-Compatible Data
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Adjusting Internal Impedances of Conductors in HIFREQ
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Subdivision in SESCAD
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Memory Limits in MALZ.
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Memory Swapping During Matrix Inversion
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Definition of Computation Methods for Step Voltage
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Recovering from errors when generating FFTSES databases
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Aligning Conductors Against a Specified Line
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
ENERGIZATION in MALZ
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Optimal Segmentation Strategy in MALT, MALZ and HIFREQ
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Extracting Data from a F09 File
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Verifying the Voltage Drop Across a VOLTAGE Energization
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Computing the Potential at Points Close to a Conductor
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Improving the Goodness of Fit in RESAP
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Distribution of Observation Points for the Computation of Touch-Voltages.
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Using Multiple GPR Energizations on the Same Structure
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Computing Voltage Drop Using HIFREQ
Dernière modification: déc. 06, 2004
Scalar Potential, GPR, Vector Potential, Conductor
2004/12/06
1
answer
Using Zoom Polygon to Plot Only Touch Voltages Within Substation and Within Reach of Substation Fence on the Outside
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Using MALZ/HIFREQ to Model Fall-of-Potential Grounding System Impedance Measurements
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Error Message when Using GPR Energization
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
How to Model a Grounding System with a Large Number of Conductor Segments
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Magnitude of Signal at the End of the Time Window
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Types of quantities that can be computed with the Ampacity utility.
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Conductor Segmentation in MALT and MALZ
Dernière modification: déc. 06, 2004
Accuracy, Earth Potentials Exceeding GPR
2004/12/06
1
answer
Behavior of HIFREQ in the presence of large impedances.
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Computing a voltage difference (as opposed to a GPR difference) with HIFREQ.
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
List of files to keep in order to regenerate CDEGS plots.
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
How to handle cases with very large numbers of conductor segments.
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Why are Computed Step Voltages Asymmetrical in a System with Four-Sided Symmetry (i.e., a Transmission Line Tower)
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
Computing Step Voltages Correctly
Dernière modification: déc. 06, 2004
Overestimating, Not Underestimating, Profile Point Spacing
2004/12/06
1
answer
Different ways to view conductors using the CDEGS utilities.
Dernière modification: déc. 06, 2004
2004/12/06
1
answer
To Model a Voltage Source in MALZ
Dernière modification: déc. 06, 2004
rectifier, equivalent
2004/12/06
1
answer
Modelling Cables in HIFREQ
Dernière modification: avr. 27, 2011
2011/04/27
1
answer
Modelling Reinforced Concrete Foundations
Dernière modification: sept. 09, 2016
2016/09/09
1
answer
The coordinate system in Right-of-Way
Dernière modification: févr. 07, 2005
line path, Y-axis, Y-coordinates
2005/02/07
1
answer
Do all points along a given path need to have increasing X-coordinates in a terminal?
Dernière modification: févr. 07, 2005
x-coordinates
2005/02/07
1
answer
The required capacity of the storage array (1213201) exceeds available storage capacity (900001) (when running the SPLITS module).
Dernière modification: févr. 07, 2005
exceed limit, capacity, array
2005/02/07
1
answer
Definition of the two options under the heading of "Short-Circuit" when defining a path for a region of a terminal
Dernière modification: févr. 07, 2005
2005/02/07
1
answer
If a conductor starts on one set of towers and then transfers or moves to another set of towers
Dernière modification: févr. 07, 2005
2005/02/07
1
answer
In ROW | Creating Total Interference model, which energization type (Tower Shunt Current vs. Tower GPR) should be selected?
Dernière modification: mars 02, 2010
Total Interference, energization type, tower shunt current, tower GPR
2010/03/02
1
answer
Computation of Touch Voltages
Dernière modification: déc. 02, 2004
2004/12/02
1
answer
Currents on Non-Faulted Phases in a Fault Scenario
Dernière modification: déc. 03, 2004
2004/12/03